One nylon fabric
1. Styling temperature: 160 ° C – 180 ° C. Speed: 20 M – 25 M / min.
2, the setting temperature is very different for the color, especially purple, pink orchid, etc., so pay attention to whether the color is the same after the fixed and fixed.
3, the thickness of the nylon fabric shrinkage is also different.
4. Nylon fabric is easy to sculpt. If there is a hook yarn in the final shape, stop it immediately, check the tail of the machine head, bellows, roller, sanding with sandpaper, or cloth.
Two polyester cloth shaping
1. Styling temperature: 170°C-200°C, speed: 20M-28M/min
2, polyester molding temperature generally does not change much, but the red dye dye sublimation fastness is not good, after the completion of the chassis will leave dye, can not be light color immediately, can only be black, can also use waste cloth more than a few machines, Can do light colors.
3, polyester stretch cloth shrinkage rate is very large, such as customer requirements for good elasticity, shrinkage rate is small, feel good, must be scheduled to die, especially pay attention to black and white. Red and white flowers, because the dye sublimation fastness is not good, the finished product must be low temperature, such as high temperature will seriously stain the product.
Three cotton silk
1. Styling temperature 160°C-190°C, speed: 20M-30M/min
2. If the cotton cloth is directly dyed, the color of the cold and hot cloth of the fabric changes greatly. The color must be completely cooled after the embryo cloth is completely cooled, and the active material does not change much.
3, the cotton shrinkage rate is very large, when setting, the tension of the cloth should be adjusted small, the pressure of the pressing car is increased, the cloth is pressed dry, the hot air blower is opened to the maximum, the machine speed is slowed down, the shrinkage rate can be reduced, if the customer demand is high , it is necessary to shrink the test.
4. If the customer asks for a twist on the cloth surface, it must be twill shaped.