Fabrics Dryer machine adopts five pass web belts tensionless drying, the hot air from the large centrifugal blower goes through the fabrics, the fabrics are shrunk through the three layers web belts, during the drying period, the fabrics move in large wave mode, completely non tension.
Machine specification: Five layers three chambers relax dryer:
Actual Power(machine normal running): 52.5kw(by inverter control)
Output: 18 tons/20hours
|Items||Our Fiver pass Tensionless Dryer||Photos|
|Overfeeding Device||● Special overfeeding structure.
Make sure the infeeding of fabrics always in tensionless form.
● With this unique design, the cotton fabrics shirnkage(fabrics retraction) could be 8%-10% after worked by the dryer.
|Heat exchanger||Alunium-steel composit fin pipe heat exchanger, which could raise temperature fastly, high efficient.|
|Air nozzles||● The nozzles adopts Germany technology, upper nozzle will blow to seven directions.
● Similar as German Krantz structure.
|Machine wall insulated material||Aluminum silicate insulation material inside of chamber door, Which is much more expensive than rock wool, but has excellant insulation result.|
|Air guide plate||● Unique design of our dryer machine, its purpose are:
A. Divide the air flow into servial sections. So the air volume will be much evenly.
B. It couble be taken out easily, so the end user can clean the fabrics fibers termly
C. thus, after severial years working, the dryer machine will still have high output(Other brands dryer, after works for some years, the daily output will be reduced coz of the fabrics fiber blcok.
● Suggest to clean it every half year
|Air ventilation door||The air ventilation door could be opened completely, very easy to clean the fibers inside of the nozzles(by taking out the air guide plate).|
|Motor with fan impeller||● The fan impeller adopts bolt to connect, could be disassemble completely, easy to maintain.
● The motor is fasten to one plate, the fan impeller is fasten to one plate, and the plates are fasten together. So the fan impeller and the fan motor could be taken out together, easy to maintain and fix problems if happen.
● There is small fan impeller that welded on the motor end, which could radiate heat.
|Energy saving||● Under the same energy consumption, the five-layer dryer is 40% longer than the three-layer dryer drying path, and the output is increased by nearly half.
● Other brand dryer machine, hot air exit gate temperature is about 70-80degree, while our five layer is 30-40degree, Hence, the heat energy is fully used and energy save.
Hot Tags: fabrics dryer, manufacturers, suppliers, factory, price