Dezhou Guanhua Textile Machinery Co.,Ltd

Tubular Heat Setting Machine

GHDX HEAT SETTING MACHINE Usage of the Machine: This heat setting  machine adopts hot air setting, maximum working temperature is 220℃. it is used for heat setting of tubular polyester...

GHDX HEAT SETTING MACHINE
Usage of the Machine:
This heat setting  machine adopts hot air setting, maximum working temperature is 220℃. it is used for heat setting of tubular polyester blender cotton fabrics. And it can be used for pre-setting of spandex. After worked by this machine, customer can get steady size, flat surface.

Main Parameter and Requirements:

Tape Width
mm
Speed
m/min
Diameter
(mm)
Power
kw
Power of oil heater DN
(mm)
Oil
(dm)
DGDX2400 2*800/
1*1600
3-20 5700*4100*3000 14.15 15 DN50 120
DGDX3800 2*1600 3-20 5100*4900*300 17.65 20 DN65 200

Technical Parameters:

Standard working width double tube 1400mm
Maximum hot air temperature 220℃
Mechanical speed 3-20m/min(speed adjusted by inverter)
Machine overfeeding rate -20% — +50%
Heating source Electric(135KW)
Thermal oil(1GJ/H)
Drive mode three sections inverter control and double driven
Exit mode plaiting or rolling
Motor power 19.94kW
Air pressure 0.4 — 0.6MPa
Machine dimension (L×W×H) 6150×4900×3300
Machine weight about 5T

Design Drawing:

Tubular Heat Setting Machine Model THS – 1 and THS – 2 for Heat Setting with Hot Air Circulating System for all synthetic fabrics and their blends with Cotton, Lycra – Polyester / Lycra – Nylon or Elastene Blends etc.
The Heat Setting machine THS is used to achieve results on knit tubular fabric, which were only possible until now with open-width fabric treated on a Stenter. It also avoids the problems and difficult handling that are faced when fabric has to be processed in open width.
The Heat Setting Machine is used for the pre-setting of Lycra / Elastene blends with cotton or synthetic fibres before the wet processing of the gray fabric, as well as the Heat Setting of synthetic fabrics and blends, if finished in tubular form.
The Heat Setting machine Guanhua is equipped with specially designed adjustable Stainless Steel Frames. Machine is equipped with Radial Blowers, one per section, a Natural Gas Burner or Thermic Fluid Heater, Nozzle Systems for uniform distribution of the re-circulating hot air and a suitable duct. The maximum temperature can be achieved up to 220 degree C. The machine is suitable for One, Two or Three Tubes.
The Cooling Zone at exit is provided to bring fabric temperature close to ambient and a Plaiter is provided at the delivery.
The machine is equipped with a Control Panel with a VFD, Temperature Controller and other accessories.

Customers Keep Coming:

Hot Tags: tubular heat setting machine, manufacturers, suppliers, factory, price

 
Online Service